The Canadian roadways accommodate several road users that may include motorcycles, large trucks, pedestrians, farm machinery, and buses. Therefore, every road user must be aware of other road users, the speed at which they move, and the spaces they occupy on the roadway.
This article will cover tips on sharing the road with pedestrians, cyclists, and large commercial vehicles.
SHARING THE ROAD WITH PEDESTRIANS
Road safety is a responsibility that both drivers and pedestrians must share. Pedestrians must ensure that the drivers see them and the drivers stopped or are about to stop before attempting to enter the road. Every driver also must exercise necessary diligence in the maintenance and operation of their vehicles to respond to pedestrians appropriately.
Watch out for children by driving cautiously and slowly when driving through school zones and residential areas where kids might be playing. Also, watch out for crosswalks and school crossings and guards, and follow their instructions accordingly. Besides, be cautious of community safety zones, slow pedestrians, the blind or people with other disabilities, people using devices, and others. However, the categories above are just a tiny bit of a broader type of road users you should note. Therefore, for a more comprehensive knowledge with practical tips, Fanshawe driving school is your best option. Aside from this knowledge, you also get to access an expert guide for Ontario driving test practice.
SHARING THE ROAD WITH CYCLIST
Furthermore, bike lanes, usually demarcated with a solid white line, are reserved for cyclists, so do not cross them. Again, watch out for children. There have been several cases of cycling accidents at intersections over the years. Therefore, to prevent collisions with a cyclist at an intersection, take note of the following;
1.When turning right, always check your mirrors and signal to ensure that you are not cutting off a cyclist
2.When turning left, wait for oncoming cyclists to pass before turning
3.When moving through an intersection, carefully scan for cyclists
4.Do not use horns unnecessarily; it may frighten cyclists.
Lastly, always remember to utilize bird boxes fully. A detailed guide about bird boxes with a wealth of several other information is available at our drive test in Ontario.
Limited speed motorcycles and motorcycles are not very common on Canadian roads due to their sizes. And because they are less protected, they are more at risk for collisions. Motorcycles utilize a full lane, so treat them like other vehicles. Again, safe driving is our focus; therefore, with our g1 test in London, Ontario, be rest assured of safety when using every Canadian road.
SHARING THE ROAD WITH LARGE COMMERCIAL VEHICLES
It is essential to know how to practice safe driving while sharing roads with large commercial vehicles. A recent study revealed that most accidents involving large commercial vehicles were not the driver’s fault but that of other drivers. Therefore, sharing the road with large commercial vehicles implies that you must know their capabilities and limitations, such as:
1.Blindspot: due to the presence of a big blind spot, avoid tailgating them
2.Stopping distance: they have a longer stopping distance, so don’t cut in front closely
3.Wide turns: to avoid hitting the curb, don’t move up into spaces unnecessarily
4.Rolling back: leave plenty of space when stopped behind a large vehicle because it may rollback, etc.
Great article, thank you for sharing these tips! This is really helpful to ensure safety when you travel. Of course another thing that you must be careful when you are driving. That’s why it is really important to take <a href=” https://driving-school.com/“> driving courses </a> to broaden our knowledge and awareness about driving.